nsigr
January 22, 2014, 6:51pm
1
Hello
I downloaded Haiku Alpha 4 Anyboot zip file and I followed the instructions to write it to a USB stick.
The problem is that when my PC tries to boot from the USB stick I see the message “Loading System” and then the system reboots.
I will write a description of my computer because I think some of my hardware may not be supported yet.
CPU: AMD Athlon 64 X2 Dual Core 4000+
Motherboard: Gigabyte GA-MA69VM-S2 (http://www.gigabyte.com/products/product-page.aspx?pid=2500#ov )
RAM: 5GB DDR2 PC5300 (667Mhz)
GPU: Sapphire Radeon HD5450
Thank you for any replies
DaaT
January 22, 2014, 10:57pm
2
Hiya nsigr and welcome. I would first try the latest nightly, which you can find here: http://www.haiku-files.org/haiku/development/
They’re stable enough for every day driver and lots has been changed since the Alpha. I use the anyboot one, others prefer the raw or ISO flavours.
If you still have problems, along with posting here, creating a bug report is always a good idea as well: https://dev.haiku-os.org/
Good luck
Where /dev/sd[x] is your USB device. *Make sure to use /dev/sdx and not /dev/sdx1. This is a very common mistake!
http://www.haiku-os.org/docs/userguide/en/bootloader.html
http://haiku-files.org/unsupported-builds/x86-gcc4hybrid/
nsigr
January 23, 2014, 3:13pm
4
Thank you for your replies.
I will try to download the latest nightly build and I will share my results with you
nsigr
January 23, 2014, 7:23pm
5
I just tried to install the latest nightly build.
Same problem again…
You need to burn the ISO or Anyboot image to a CD.
nsigr
January 24, 2014, 2:22pm
8
Ok I will try to make a liveCD then